STAUFF · Replacement Elements · inline line
SE-160-G-10-B filter element: specifications & equivalents
The SE-160-G-10-B is a STAUFF inline-line hydraulic filter element, sized 90.5 × 329 mm OD × length (ID 48.5 mm). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 90.5 × 329 mm
Inside diameter 48.5 mm
Line type inline
Partially verified. Fit and grade trace to an official interchange document;
dimensional values are compiled from 0 aftermarket listing(s)
and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 90.5 mm |
| Inside diameter ID | 48.5 mm |
| Length | 329 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-27 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensions & series range
| Outside diameter | 90.5 mm (3.563 in) |
| Inside diameter | 48.5 mm (1.909 in) |
| Overall length | 329 mm (12.953 in) |
All 91×329 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1266462 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 1266462 (HYDAC) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 1266713 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 1266713 (HYDAC) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 77889660 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 77889660 (COMEX / Ecoparts) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 890007PS10 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 890007 PS 10 (MAHLE / Filtration Group) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 890007SM10 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 890007SM10 (MAHLE / Filtration Group) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 890007SMX10 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 890007 SMX 10 (MAHLE / Filtration Group) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ ABZFEN0350101XMA page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists ABZFE-N0350-10-1X/M-A (EPE / Bosch-Rexroth Filtration) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ ABZFEN0350101XVA page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists ABZFEN0350-10-1XVA (EPE / Bosch-Rexroth Filtration) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ HD1066 page in verification queue | MANN-FILTER | partial | STAUFF Filter Interchange lists HD 1066 (MANN-Filter) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ HY13127 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists HY 13127 (SF-FILTER) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ IR251301 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists IR251301 (MOREAU) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ PT9303MPG page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists PT9303MPG (BALDWIN) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ REIR251301 page in verification queue | STAUFF | partial | STAUFF Filter Interchange lists REIR251301 (MOREAU) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ STU661 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists STU-661 (NORMAN) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ WN200105 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists WN200105 (BILLION) as replaced by SE-160-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the SE-160-G-10-B model number is decoded
- SE-160-G-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the SE-160-G-10-B filter element?
The published envelope is 90.5 mm OD × 329 mm length with a 48.5 mm inside diameter (3.563 × 12.953 in × 1.909 in ID). Confirm against the housing drawing before ordering.
What replaces the SE-160-G-10-B filter element?
15 partial match(es) requiring parameter review
How do I read the SE-160-G-10-B part number?
See the designation decoder above: each segment of SE160G10B encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 13 catalog element(s) share the 91×329 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
SE-160-G-03-B SE-160-G-05-B SE-160-G-20-B SE-160-GA-03-V SE-160-GA-10-V SE-160-H-03-B SE-160-H-05-B SE-160-H-10-B SE-160-H-20-B SE-160-S-100-B
Other models in the Replacement Elements series
All 3832 → AD-030-B-125-B AD-030-B-40-B AD-030-B-60-B AD-030-B-80-B AD-030-E-20-B AD-033-B-40-B AD-033-B-60-B AD-033-B-80-B FE-BL-200 FE-BL-500
Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-27. Read our editorial & correction policy.